Rumah > Produk >

35kV Overhead Cable Fault Detector for Precise Overhead Line Fault Detection

Name: 35kV Overhead Cable Fault Detector for Precise Overhead Line Fault Detection
Brand: Xi'an Xu&Hui Electromechanical Technology Co., Ltd.
SKU: XHJK531
Price: 1,050.00 USD
Availability: InStock

Rincian produk:

Tempat asal:	Xi'an ShanXi Tiongkok
Nama merek:	XZH TEST
Sertifikasi:	ISO/CE
Nomor model:	XHJK531

Informasi Rinci

Tempat asal:

Xi'an ShanXi Tiongkok

Nama merek:

XZH TEST

Sertifikasi:

ISO/CE

Nomor model:

XHJK531

Menyoroti:

High Light

Menyoroti:

35kV Overhead Cable Fault Detector

Overhead Line Fault Detector

Precise Overhead Cable Fault Detector

Trading Information

Kuantitas min Order:

1set

Kemasan rincian:

Kemasan kayu

Waktu pengiriman:

5-8 hari kerja

Syarat-syarat pembayaran:

T/T

Menyediakan kemampuan:

3000unit/tahun

Deskripsi Produk

XHJK531Overhead line fault tester

Our overhead line and cable fault detector is designed for efficient identification and location of faults in overhead power lines and cables. This essential tool helps maintenance teams quickly pinpoint issues to minimize downtime and improve system reliability.

Technical specification

Positioning accuracy	0.2 meters
Transmitter output characteristics	(1)Output frequency 1Hz (2) Open circuit voltage: fundamental wave effective value 0~2800V, (Pulsating DC, peak value 8kV, equivalent to the peak phase voltage of a 10kV line); (3) Short circuit current: fundamental wave effective value 0~35mA (pulsating DC, peak value 100mA)
The wireless communication distance between the sensor and the receiver	not less than 100m
Transmitter power	maximum power 900W

35kV Overhead Cable Fault Detector for Precise Overhead Line Fault Detection 0

1). Power supply: Turn on the power switch, the power indicator light is on, but there is no signal output from the transmitter at this time.

2). Start output:

First, adjust the "Output Adjustment" knob to the zero position. The "Zero Position Indicator" light turns on. Then press the "High Pressure Close" button and slowly adjust the "Output Adjustment" knob clockwise. The "Zero Position Indicator" light goes out and the transmitter starts to output. , continue to adjust the "Output Adjustment" knob to maximize the input current, and the protection indicator light does not light up. If the protection indicator light lights up, it means that the line fault resistance is small and the input current is too large. At this time, you need to adjust the "Output Adjustment" knob counterclockwise to the zero position, and then readjust it to the appropriate position.

3). Stop output: If you need to stop output, press the "High Voltage Point" button.

4). After the work is completed, turn off the power and remove the wiring.

Tag:

35kV Overhead Cable Fault Detector for Precise Overhead Line Fault Detection

High Light

Menyoroti:

35kV Overhead Cable Fault Detector

Overhead Line Fault Detector

Precise Overhead Cable Fault Detector

High Voltage Cable Fault Locator,

High Voltage Pulse Generator,

Portable Cable Fault Locator

Portable Cable Fault Pinpoint Locator with High Voltage Detection for Overhead Line Compatibility

Smart Communication Cable Fault Detector and Signal Cable Fault Locator for Accurate Fault Detection

Smart TDR Cable Fault Locator for Low Voltage Cable Testing and Detection

Smart TDR Cable Fault Locator for Signal and Communication Cable Detection

High Voltage Cable Fault Locator with Clock Hands Swing Judgment

35kV Portable Cable Fault Locator with Clock Hands Swing Judgment for Precise Detection

Portable Cable Fault Identifier with Precise Detection and Direction of Clock Hands' Swing